Showtec
4.5° fixed beam angle
Two diffusers included (10° and 40°)
Additional diffusers for 20° and 10° x 60° available
Power Pro connections
4.5° fixed beam angle
Two diffusers included (10° and 40°)
Additional diffusers for 20° and 10° x 60° available
Power Pro connections
Suitable for theatrical applications, museums, and exhibitions
High CRI for accurate colour rendering
Silent operation
Manually adjustable zoom and dimmer
Compact design
Soft field of light
Barndoor and filter frame included
Durable, water-repellent Codura fabric
Protects during transport and storage
Durable, water-repellent Codura fabric
Protects during transport and storage
Suitable for Accent Spot Q4 / SW
Plastic
Suitable for Accent Spot Q4 / SW
Plastic
Suitable for Accent Spot Q4 / SW
Plastic
Suitable for Accent Spot Q4 / SW
Plastic
Suitable for colour mixing on stage
IP65 (dust and water resistant, fit for temporary outdoor use)
40° fixed beam angle
Power Pro True connectors
Bracket and IP65 power connector included
Suitable for colour mixing on stage
IP65 (dust and water resistant, fit for temporary outdoor use)
40° fixed beam angle
Bracket and IP65 power connector included
Seamlessly extend EventLITE Table poles
Lightweight, but sturdy aluminium
Available in matching colours
Suitable for illuminating a table or bar
Touch dimmer
Average battery run time: 16 hours
IP54 rating, suitable for temporary outdoor use
USB-A - USB-C cable included
Compact and stylish design
Quick and easy installation
Changes colours, brightness, scenes, and speeds
Including battery
Wide beam angle of 75 degrees
Excellent optics for powerful output
4/6-Channel DMX, Master/slave, and Sound modes
Ideally suited for low ceilings and short-throw projection applications
120 ml/min
Customizable output direction gives extra flexibility
Extreme silent operation due to CO? supply
Output and fan speed remote controllable by DMX and W-DMX
Fast and easy setup with Q-lock CO? hose system
Very low fluid consumption and long lasting smoke
Self-cleaning system
1800 - 10,000 K CCT with high CRI
Suitable for temporary outdoor applications (IP65)
Silent operation
Manual/DMX controllable with built-in programs
Suitable for fixed installations
48 preset colours
CCT colour temperature range of 1800 - 10,000 K
DMX/RDM, W-DMX, Master/Slave and Manual mode
Silent operation
Mounting bracket suitable for a certified safety cable
Including 2.4 m power cable, bare cable and cable gland
Wide beam angle of 75 degrees
Excellent optics for powerful output
4/6-Channel DMX, Master/slave, and Sound modes
Ideally suited for low ceilings and short-throw projection applications
Volume control (0-100 %)
Manual, Timer Control and Continue output
For Showtec Solaris laser effects
With unlocking key
Free use of QuickShow software thanks to FB4 module
Full colour spectrum thanks to analogue laser control
45° laser scan angle, scanning up to 35 kpps at 8°
Low beam divergence (<1.1 mrad at full angle)
Full colour spectrum thanks to analogue laser control
45° laser scan angle, scanning up to 30 kpps at 8°
Low beam divergence (<1.6 mrad at full angle)
Free use of QuickShow software thanks to FB4 module
Full colour spectrum thanks to analogue laser control
45° laser scan angle, scanning up to 30 kpps at 8°
Low beam divergence (<1.6 mrad at full angle)
Free use of QuickShow software thanks to FB4 module
Full colour spectrum thanks to analogue laser control
45° laser scan angle, scanning up to 35 kpps at 8°
Low beam divergence (<1.1 mrad at full angle)
Leading and trailing edge dimming
4 dimmer curves for conventional and LED lights
Special Effects mode with safety channel
Mounting holes on top and backside
Leading and trailing edge dimming
4 dimmer curves for conventional and LED lights
Special Effects mode with safety channel
Mounting holes on top and backside
Leading and trailing edge dimming
4 dimmer curves for conventional and LED lights
Special Effects mode with safety channel
Mounting holes on top and backside
Padded lining
Accessory pocket
Carrying handles
Durable, water-repellent Codura fabric